Keraamiset Anilox-rullat

Valuteräs-, alumiini- tai hiilikuitutelakaran pinta on päällystetty keramiikkakerroksella. Viimeistelyn koneistuksen jälkeen telan pintaan kaiverretaan soluverkkokerros laserilla tulostuslaadun, musteen paksuuden ja niin edelleen mukaan.

Lähetä kysely

Kuvaus

Tuotteen esittely

The surface of cast steel, aluminum, or carbon fiber roll mandrel is coated ceramics layer. After finish machining, the roll surface will be engraved a layer of cell net by laser according to printing fineness, the thickness of ink and so on. Ceramic roll is widely used in printing, plastic, coatings , optics, semiconductor and other fields. Ceramic Anilox Rollers have capillary pores and is hydrophilic, making the ink layer more uniform and fine, which can significantly improve the quality of the print.

ominaisuudet

For some industries where coating is very expensive, although the use of Ceramic Anilox Rollers increases the cost for a while, but in the long run, it seems that the material used will be greatly saved, and the production speed is increased, so the benefits are obvious. It has to be polished surface treatment after laser engraving the mesh, with smooth surface and almost no abrasion to the rubber roller and printing plate.

Etu

1. Korkean kovuuden keramiikka

2. Tiheä pinnoite

3. Korroosionkestävyys

4. Tarkka musteen siirto

5. Solupisteet ovat hyvin määriteltyjä. Soluseinämät ovat sileät. Siirto on korkea.

6. Helppo puhdistaa.

Erittely

Solutyyppi	Quad	Hunajakenno	Kutoa	Helix
Tutkinto	45 astetta	60 astetta		45 astetta tai 60 astetta

LPI ja BCM

Malli	M1	M2	M3	M4	M5	M6	M7	M8	M9	M10	M11	M12	M13	M14	M15	M16	M17	M18	M19
LPC	40	50	60	70	80	100	120	140	160	180	200	220	240	260	280	320	400	470	550
LPI	100	120	150	180	200	250	300	350	400	450	500	550	600	650	700	800	1000	1200	1400
BCM	20	16	13	10	9	8	6	6	5	5	4	4	3	3	3	2.5	2	1.5	1